PTC Creo 3.0 M010~Mxxx patcher Win32&64 通用補丁包 By SSQ（許可證）

野火 · 發表于 2014-10-21 22:42

1. Open "ptc_licfile.dat" in text editor and replace 00-00-00-00-00-00 in every-feature with your real ptc_hostid (real ptc-hostid of your computer is shown in left bottom coner of PTC installer window).

2. Save edited "ptc_licfile.dat" on your computer

3. Create system environment variable PTC_D_LICENSE_FILE=<full path to ptc_licfile.dat>

4. Install PTC Creo 3.0 M010. In Licensing window if there is no path to ptc_licfile.dat in field "License Summary > Source" just drug-and drop ptc_licfile.dat in that field

5. Run "PTC_Creo_Patcher_0.1_SSQ.exe" (on Vista/Win7/Win8 computers be sure to run it as Administrator).

Click "Look For..", browse to <Creo 3.0 progdir>\M010\Common Files\ (by default C:\Program Files\PTC\Creo 3.0\M010\Common Files\) and click "Look For.." once again

Click "Start" and wait for patcher info window "All files seem to be patched. Enjoy!"

Click "OK"

6. If you have installed PTC Creo 3.0 M010 Distributed Services Manager

Click "Look For..", browse to <Creo 3.0 Distributed Services Manager progdir> (by default C:\Program Files\PTC\Creo 3.0\Distributed Services Manager\) and click "Look For.." once again

Click "Start" and wait for patcher info window "All files seem to be patched. Enjoy!"

Click "OK"

7. 7. If you have installed Mathcad Prime 3.0 M010

Click "Look For..", browse to <Mathcad Prime 3.0 progdir> (by default C:\Program Files\PTC\Mathcad Prime 3.0\) and click "Look For.." once again

Click "Start" and wait for patcher info window "All files seem to be patched. Enjoy!"

Click "OK"

8. Close "PTC_Creo_Patcher_SSQ"

9. Enjoy

Cracked by Team-SolidSQUAD